
Elpress AB
- Ring terminals 0.1 – 6 mm²
- Fork terminals 0.1 – 6 mm²
- Flanged fork terminals 0.5 – 2.5 mm²
- Hook terminals 0.5 – 2.5 mm²
- Pin terminals 0.1 – 6 mm²
- Blade terminals 0.25 – 6 mm²
- Through connectors 0.25 – 6 mm²
- Through connectors with heat shrink insulation 0.5 – 6 mm²
- Parallel through connectors 0.5 – 6 mm²
- Receptacles, rolled type 0.1 – 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 – 2.5 mm²
- Receptacles fully insulated rolled type 0.5 – 6 mm²
- Tabs 0.5 – 6 mm²
- End connector sleeves fully insulated 1 – 6 mm²
- Bullet 0.25 – 6 mm²
- End connector sleeves fully insulated 0.25 – 6 mm²
- Pre-insulated end terminals 0.14 – 50 mm² ET, standard color.
- Pre-insulated end terminals 0.14 – 50 mm² ETT, alternative color.
- Pre-insulated end terminals 0.14 – 50 mm² ETD, alternative color.
- Uninsulated end terminals 0.25 – 50 mm².
- Pre-insulated TWIN-end terminals 2 x 0.5 – 2 x 10 mm², ET2, standard color code.
- Pre-insulated TWIN-end terminals 2 x 0.5 – 2 x 10 mm², ETT2, alternative color code.
- Pre-insulated TWIN-end terminals 2 x 0.5 – 2 x 10 mm², ETW2, alternative color code.
- Ring terminal 0.25 – 6 mm²
- Fork terminals 0.25 – 10 mm²
- Pin terminals 0.25 – 6 mm²
- Jointing sleeves 0.75 – 10 mm²
- Receptacles rolled type 0.5 – 6 mm²
- Receptacles with locking lip rolled type 0.5 – 6 mm²
- Multiple tabs, rolled type (piggy back) 0.5 – 2.5 mm²
- Receptacles 90° rolled type 0.5 – 1.5 mm²
- Receptacle angled rolled type 0.5 – 1 mm²
- Tab 0.5 – 2.5 mm²
- Tab with locking lip 0.5 – 6 mm²
- Bullet and Socket 0.2 – 1.5 mm²
- Tab connectors
- Tab connector 45°
- Tab connector 90°
- Tab connector 2 x 45°
- Connector block for receptacles 1.5 – 6 mm²
- Connector block for bullets and sockets 0.2 – 1.5 mm²
- Connector block for receptacles – 400V/18A
- Tabs 1, 2 and 3 male
- Insulation boots
- Tabs for soldering
- Tube terminals 0.75 – 10 mm²
- KRF tube terminals 16 – 800 mm²
- KRF tube terminals with two holes, 16 – 400 mm²
- KRFS tube terminals 50 – 400 mm² with narrow palm
- KRFN tube terminals 50 – 240 mm² with narrow palm
- KRF angled terminals 90°, 10 – 185 mm²
- KRD tube terminals 16 – 1000 mm²
- KRT tube terminals 10 – 500 mm²
- DIN 46235 tube terminals 6 – 1000 mm²
- DIN 46234 sheet metal terminals 10 – 185 mm²
- KS/KSF through connectors 0.75 – 800 mm²
- KS/KSF through connectors with partition 10-500 mm²
- KSxP parallel connectors for conductors total 0.5 – 6.75 mm²
- KSxP parallel connectors for conductors total 10 – 630 mm²
- CUT through connectors for single strand conductors 6 – 16 mm²
- KSD through connectors 16 – 1000 mm²
- KST through connectors 10 – 500 mm²
- DIN 46230 pin terminals 10 – 95 mm²
- KRX tube terminals for Excel and Fxcel cable 10 – 16 mm²
- KSX through connectors for Excel and Fxcel cable 10 – 16 mm²
Elpress – a global company
Have been developing, manufacturing and marketing complete crimping systems for electrical connectors since 1959. The Elpress Group consists of the Elpress and ABIKO business areas and is owned by Lagercrantz Group AB.
The Elpress headquarters and factory are located in Kramfors, Sweden. Subsidiaries are Elpress GmbH, Elpress A/S, Elpress (Beijing) Ltd. and Elpress Inc. with warehouses in Viersen, Germany, Silkeborg, Denmark, Beijing, China and Chicago, USA. In total, around 160 people work in the Elpress Group. Kramfors is a town in the Gudmundrå district of Ångermanland and the centre of Kramfors Municipality, Västernorrland County, Sweden. The town is located on the western bank of the Ångermanälven River, along the Ådalen valley, and is crossed by National Highway 90 and the Ådalsbanan railway line. To the west, the town also borders on Höga kusten, which is the area of the Swedish coast with the most hills. The town is historically known for its large sawmill industry in the latter half of the 19th century, and the town centre saw extensive new construction in the first half of the 2010s.